Brochure
Rooftop Crossover Platforms Brochure
A modular, non-penetrating crossover that lets workers walk safely over pipes, ducts and height changes on the roof. Guardrails, non-slip treads and toe boards, in aluminum or galvanized steel.
What’s inside
- Why pipes, ducts and roof-level changes are trip-and-fall points
- A modular, non-penetrating stair-and-bridge over the obstruction
- Guardrail on both sides for the full path: stairs, bridge and landings
- System specs: 42-inch rail height, 200 lb load, flooring and base options
- Related platforms: rooftop walkways, static and mobile platforms, catwalks and gangways
- Fits metal profile, standing-seam and other roofs without piercing the membrane
Every pipe, duct and level change on a roof is a trip point
Workers still have to get past these obstacles. Without a safe crossing, people trip, fall, or step on the equipment below. A crossover gives them a clear, guarded path over the obstruction.
A modular system that does not pierce the roof
Tritech engineers each crossover to the pipe run, duct or change in roof level. Non-penetrating bases sit on the membrane unless a site condition requires a fixed foot. The stair, bridge and landings have guardrail on both sides, with non-slip treads and toe boards.
Key specs
| Top rail height | 42 in ± 3 in |
|---|---|
| Outward or downward force | 200 lb |
| Material | Aluminum or galvanized steel |
| Flooring | Nylon treads, checker plate or grating |
| Roof penetrations | None, unless site conditions require it |
| Installation | Modular components; no drilling or welding unless needed |
Questions about this brochure
Does the crossover have to be bolted to the roof?
Usually no. It is designed as a non-penetrating, freestanding system. Fixed feet are used only when site conditions require them.
Will it fit my pipe run or duct?
Yes. Each crossover is engineered to the obstruction and the roof, with variable height and length.
What is it made of?
Aluminum or galvanized steel, with slip-resistant nylon treads, checker plate or grating, and toe boards.
What roofs can it sit on?
All roof types, including metal profile and standing seam, without piercing the membrane.
Installed, not just specified
On site with Tritech
1,200+ successful installations in Canada
Have a site in mind?
Tell us about the hazard. We’ll tell you what we’d install, how long it takes and what it costs.




